» Blog » Sanding an engineered floor

Not all engineered wood floors are equal! However, this depends on the amount of sanding that is essential to achieve a smooth surface before applying the finish. If your engineered floors are in poor condition and have deep scratches and cracks, you may need to sand them down. The floor sanding process can remove a layer of wood ranging in thickness from 1/32 inch to 1/16 inch.

  • With an engineered floor, this method could eventually expose the plywood, leaving color variation in the grain and the floor after finishing.
  • Most engineered floors have a thickness that varies between 1/16 inch to 3/8 inch for thicker floors. The thicker the thickness of the wood slat, the more the floor will cost. They consist of multiple layers of three-ply laminate wood glued and pressed together.
  • The surface material (wear layer) or hardwood is about 1/16 inch to 3/8 inch thick, followed by two layers of softer wood.

Sanding an engineered floor

 

Benefits Of Having Engineered Flooring

Engineered floors are as durable as solid hardwood floors and are commonly best for shopping malls that experience heavy traffic. The main advantage of engineered flooring is, above all, the fact that it reacts less to changes in humidity and temperature.

If you are looking to bring back the lustre of your engineered wood floor, you can get it with a light refinishing and reapplying a coat of finish. This method only removes the finish from the wood with minimal reduction in the original thickness. However, the marks on the engineered floor will remain visible after this refreshing work. To remove the grooves, it is necessary to sand down to the wood and re-varnish it.

For a complete renovation of your hardwood floor to restore it to its original appearance, it is right that you contact a professional hardwood floor sanding and varnishing company in your area. Usually, the first visit is free, and at that time, they will tell you the best method to achieve the result you are looking for.

 

When Should You Not Sand Engineered Flooring?

There are instances where it is not advisable to sand an engineered wood floor that has been sanded many times before. Even a flooring contractor will be reluctant to risk sanding it. It is also advisable not to sand if the engineered floor is uneven or warped. You can sand engineered floors (lots of times), but don’t overdo it either.

Other than that, yes, you can sand and seal your engineered wood floors. However, call on an engineered flooring professional to refurbish your old worn floors and avoid the risk of a wood slat.

Before you begin, ensure you’ve read the articles using a floor sander. This will help prevent any severe damage to your floor. If you want to do a good job, educate yourself. If the engineered wood floor is thick and flat enough, you can walk away with a thick wear layer. You may be able to sand your floor 2 or 3 times, massively increasing the life of your floor!

So it is obvious that sanding an engineered floor is very complex. Therefore, it requires the intervention of a craftsman expert in sanding and finishing engineered floors.

 

The Pros and Cons of Sanding Engineered Wood Floors

Engineered wood floors are a popular choice for homeowners due to their durability and resistance to changes in humidity and temperature. However, when it comes to sanding and refinishing these floors, the process can be more complicated than with solid hardwood.

One of the main advantages of engineered wood floors is that they are made up of multiple layers of laminate wood, which makes them more stable and less likely to warp or bend. However, this also means that sanding these floors can be more complex and requires the use of specialized equipment.

When sanding an engineered floor, it’s important to remove only a minimal amount of wood, as removing too much can expose the plywood layer and result in color variations in the grain. Additionally, the thicker the wood slat, the more expensive the floor will be.

Another benefit of engineered wood flooring is that it is durable and can withstand heavy traffic, making it a great option for high-traffic areas such as shopping malls. However, sanding may be necessary to achieve a smooth surface before applying the finish if the floor is in poor condition and has deep scratches or cracks.

On the other hand, there are instances where it is not advisable to sand an engineered wood floor. If the floor has been sanded many times before, a flooring contractor may be hesitant to risk further sanding. Additionally, if the floor is uneven or warped, sanding may not be the best option.

 

Sanding an engineered floor

 

Conclusion: The Complexities of Sanding an Engineered Floor

In conclusion, sanding an engineered wood floor can be a complex process that requires the expertise of a professional. However, with the right equipment and techniques, it is possible to bring back the lustre of your engineered wood floor with a light refinishing and reapplication of a coat of finish. If you’re unsure about whether or not to sand your engineered wood floor, it’s best to consult with a professional flooring contractor in your area. It is important to remember that sanding an engineered floor can be very complex, and it requires the intervention of a craftsman expert in sanding and finishing engineered floors.