» Blog » Floating parquet: 9 errors to prevent

Floating flooring is a floor covering that is highly prized for the aesthetic and practicality it offers its followers. But this type of flooring is also characterized by its ease of installation, which does not involve the use of glue or nails. Nevertheless, to be sure to benefit from the various particularities of this type of flooring, there are a number of errors to be avoided both during the choice of the system and during its installation. Here are a few lines about this subject.

Betting on lower quality floating parquet

When choosing the parquet flooring you will install in your home, you should always choose top quality products. This will ensure that the future flooring you install will be as attractive, long-lasting and durable as it is durable. Also, make sure you always choose a model of floating parquet suitable for the use you want to make of it.

Buying a floating parquet for its uneven ground

It is brought to the attention of floor buyers that a floating floor is not the best option for use on an uneven floor. The simple reason for this is that this type of flooring is likely to curl much more in case of high moisture content. As long as the irregularity is 4 mm and less, an insulating underlay will be applied to make up for the missing level.

Laying a floating parquet in an unsuitable room

Floating parquet is usually a simple wood to install as compared to solid wood flooring. However, it has an increased level of fragility, which makes it worthy of special attention. The goal is to keep its original look as long as possible. Therefore, keep in mind that floating flooring is a floor covering that should be installed in the living room or bedrooms, but very rarely in the kitchen or bathroom.

Forget to prepare the floor before installing floating flooring

Although regarded as a simple to install floor covering, the installation of floating parquet still requires a minimum of preparation. Before beginning the installation work, it is essential that the floor in the room where your floating floor will be installed is dry, sound, clean and flat.

Laying a floating parquet without the underlayment

For the installation of a floating parquet floor, it is also of utmost importance to lay an insulating underlay before the actual installation. The aim of this layer is to protect your floor from humidity as well as from all sound and thermal inconveniences.

Lay the slats parallel to the window

According to the configuration of your room, the arrangement of the strips of a floating parquet will not be the same. However, it is essential to know that the orientation of the strips is chosen according to the sources of natural light in the room in question. In this regard, you must avoid at all costs that the strips of a floating parquet floor are laid parallel to your main window.

Save on the amount of boards required for installation

For a successful installation of your floating floor, the ideal would be to always raise your needs by about 10%. Acquiring a parquet floor with a small margin will indeed expose you to some installation problems. If you still have some strips left, you can use them in renovation for a change of damaged strips.

Making a mistake on the technique of laying a floating floor

The stage of laying a floating floor is more than crucial. To assure that you benefit from a high quality and especially resistant floor, it is crucial to use the appropriate techniques. The installation of this type of flooring does not require the use of staples, nails or glue. As its name suggests, floating parquet is a floor covering that is laid in a floating manner on joists previously installed on the floor to be treated.

Choosing to lay your own floating parquet

Even if floating parquet is more than a simple installation, entrusting its installation to real specialists in the field is the option to always favour. It is for you the assurance of less work to enjoy an aesthetic, durable and practical floor in your home.